The ECO-AIRE Maxx air dryer is a portable three-stage system for 150–250 CFM compressors. Its aftercooler, water separator and 1-micron coalescing filter help deliver cooler, cleaner air for dry ice blasting, abrasive blasting and pneumatic equipment.
The Super-Dry D3 200 CFM desiccant air dryer is a single-tower unit for point-of-use and intermittent compressed-air service. It provides 200 SCFM at 100 PSIG through 2-inch NPT ports and includes a pre-filled replaceable cartridge, gauges, safety valve and ball valve.
The Super-Dry D2 150 CFM desiccant air dryer is a single-tower unit for point-of-use and intermittent compressed-air service. It combines moisture separation, coalescing filtration and a replaceable activated-alumina cartridge in a 1-1/2-inch NPT assembly rated to 150 PSI.
The Super-Dry FSD-375-W water separator removes bulk liquid from compressed air using centrifugal action. Rated for 370 SCFM at 100 PSIG with 1-1/2-inch NPT ports, it includes a float drain and is commonly installed upstream of filters or dryers.
The Dry Ice Energy dry ice hopper tank extension increases a compatible 3 L hopper to approximately 6 L, reducing refill interruptions during longer cleaning jobs. Confirm the exact machine model, production revision and mounting hardware before ordering.
The Super-Dry FSD-185-W water separator removes bulk liquid from compressed air using centrifugal action. Rated for 180 SCFM at 100 PSIG with 1-inch NPT ports, it includes a float drain and helps protect downstream filters and dryers.
The Dry Ice Energy push handle combines a stainless-steel transport bar with practical hose storage for compatible Champ-family dry ice blasting machines. It helps reposition the unit and organize air and blasting hoses between jobs. Confirm mounting compatibility before purchase.
The Dry Ice Energy XL flat jet nozzle creates an extra-wide blast pattern for faster coverage across upholstery, wheels, panels and other open surfaces. It covers approximately ten times the area of a standard round nozzle; actual coverage depends on the operating setup.
The Dry Ice Energy flat jet nozzle creates a wide blasting pattern for upholstery, wheels, vehicle interiors and open surfaces. It covers approximately five times the area of a standard round nozzle, depending on pressure, distance and machine setup.
The 45° angled dry ice blasting nozzle from Dry Ice Energy helps direct the blast stream into corners, recesses and obstructed work areas. The approximately 25 cm attachment rotates 360° so the outlet can be aligned with the surface being cleaned. Confirm machine and blasting-gun compatibility before ordering.
The Dry Ice Energy 10 mm power nozzle has a 160 mm length and enlarged internal bore for higher-flow cleaning with compatible Champ, Champ Turbo and Champ Vario machines. It accepts 1.5 mm and 3 mm pellets; confirm compressor capacity and machine compatibility before use.
The Dry Ice Energy blasting gun work light positions a MagLite XL200 LED near the cleaning point for better visibility in engine bays, wheel wells, interiors and machinery. Fits the Dry Ice Energy Champ and Champ Turbo; contact us to confirm the mount for your blasting gun.