Super-Dry FSD-375-W 370 CFM Water Separator
$718.75
The Super-Dry FSD-375-W water separator removes bulk liquid from compressed air using centrifugal action. Rated for 370 SCFM at 100 PSIG with 1-1/2-inch NPT ports, it includes a float drain and is commonly installed upstream of filters or dryers.
Description
Bulk Moisture Separation for Compressed-Air Systems
The Super-Dry FSD-375-W water separator uses centrifugal airflow to remove bulk liquid water from compressed air before it reaches a dryer, filter, blasting machine or pneumatic tool. Its internal spinner drives entrained liquid toward the housing, where the included float drain discharges collected condensate.
A centrifugal separator is commonly installed downstream of an aftercooler or air receiver and upstream of a desiccant dryer. Removing bulk liquid at this stage helps protect dryer cartridges and downstream filtration from flooding.
Key Features
- 370 SCFM at 100 PSIG: Listed flow capacity for properly sized compressed-air systems.
- 1-1/2″ NPT ports: Match the separator to appropriately sized piping and hose.
- 232 PSIG maximum inlet pressure: Suitable only when every system component remains within its rating.
- 176°F maximum inlet temperature: Inlet air must remain below the listed limit.
- Included float drain: Automatically removes collected condensate under suitable operating conditions.
- Compact centrifugal design: Removes bulk liquid without consumable desiccant.
What a Water Separator Does — and Does Not Do
The unit removes bulk liquid water. It does not by itself guarantee dry air, remove all water vapor or deliver a defined pressure dew point. Blasting and critical pneumatic applications may also need an aftercooler, coalescing filter and desiccant or refrigerated dryer.
Installation Guidance
- Install in the indicated flow direction with adequate support and service access.
- Keep inlet pressure and temperature within the published limits.
- Route the drain discharge safely and check float operation regularly.
- Provide isolation and fully depressurize the system before maintenance.
- Size piping to avoid excessive pressure drop at operating flow.
Super-Dry FSD-375-W Specifications
| Manufacturer part number | 330-130 |
|---|---|
| Inlet / outlet ports | 1-1/2″ NPT |
| Airflow at 100 PSIG | 370 SCFM |
| Maximum inlet pressure | 232 PSIG |
| Maximum inlet temperature | 176°F / 80°C |
| Drain | Float drain included; timer drain may be available |
Review the complete air-treatment requirements for dry ice blasting, or contact Cryo Restorations for component sizing and compatibility.
Professional compressed-air installation is recommended. Confirm current pressure certification, port thread and drain configuration before ordering.
Additional information
| Brand | Super-Dry |
|---|---|
| Model | FSD-375-W |
| Product Type | Centrifugal Water Separator |
| Airflow | 370 SCFM at 100 PSIG |
| Port Size | 1-1/2" NPT |
| Maximum Inlet Pressure | 232 PSIG |
| Maximum Inlet Temperature | 176°F |
| Drain | Float drain included |
Reviews
There are no reviews yet.